欢迎进入苏州德计仪器仪表有限公司网站! 固话:0512-68790450 手机:13915418480 返回首页 | 联系我们
大家都在搜: 固纬安规测试仪,固纬耐压测试仪,固纬LCR测试仪
产品中心/ product center 您的位置:网站首页 > 产品中心 > > 耐压测试仪,安规测试仪 > 7140精密型耐压测试仪
精密型耐压测试仪

精密型耐压测试仪

产品型号: 7140

所属分类:耐压测试仪,安规测试仪

产品时间:2023-05-20

简要描述:7140精密型耐压测试仪,耐压AC:5KVAC/20mA ,耐压DC:6KVAC/7.5mA

详细说明:

7140精密型耐压测试仪,耐压AC:5KVAC/20mA ,耐压DC:6KVAC/7.5mA

7100系列精密型耐压/绝缘测试仪7130、7132、7140、7142 三种测试功能可供选择:ACW, DCW, IR
三种测试功能可供选择:ACW, DCW, IR
大型128×64 Graphic LCD 显示器
单机可与7315接地阻抗测试器连结符合标准19英吋仪器架
可同时进行100台的联机测试
内建10组程序记忆、每一组3个测试步骤可进行程序记忆步骤的连结测试
快速放电功能,可于0.2秒将被测物上的电能放完,确保人员安全
防高压触电功能,当人体误触时可立即中断输出
开机自我检测功能的测试,可于测试前进行判定各项测试功能是否正常
前面板软件输入校正
时间与日期的设定,可设定校正时间及预警时间提醒使用者
内建PLC Remote遥控界面
键盘锁定功能
安全锁定功能
体积小、重量轻

MODEL 7130 7132 7140 7142
AC WITHSTAND VOLTAGE
Output Rating 5KVAC/20mA
Range
Resolution
Accuracy
Output Voltage, KVAC
0-5.00
0.01
±(2% of setting + 5V)
Output Frequency 50Hz/60Hz ±100ppm, User Selection
Output Waveform Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5
Output Regulation ± (1% of output + 5V), From no load to full load
SETTINGS
Max-Limit AC Current, mA
0 - 20.00
0.01
±(2% of setting + 2counts)
Min-Limit AC Current, mA
0 - 9.999
0.001
±(2% of setting + 2counts)
Ramp Up Time, second
0.1 - 999.9
0.1
±(0.1% + 0.05sec)
Ramp Down Time, second
0 - 999.9
0.1
Dwell Time, second
0, 0.3 - 999.9
(0=continuous)
0.1
Arc Detection 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity)
DC WITHSTAND VOLTAGE (7140,7142 ONLY)
Output Rating 6KVDC/7500µA
Output Voltage, KVDC
0 - 6.00
0.01
±(2% of setting + 5V)
Output Ripple <5%(6KV/7500µA at Resistive Load)
SETTINGS
Max-Limit DC Current, µA
0 - 7500
1
±(2% of setting + 2counts)
Min-Limit DC Current, µA
0 - 999.9
0.1
±(2% of setting + 2counts)
Ramp Up Time, second
0.1 - 999.9
0.1
±(0.1% + 0.05sec)
Ramp Down Time, second
0, 1.0 - 999.9
0.1
Dwell Time, second
0, 0.4 - 999.9
(0=continuous)
0.1
Arc Detection 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity)
Discharge Time ≦ 200 msec
INSULATION RESISTANCE (7132,7142 ONLY)
Output Rating 1KVDC/9999MΩ
Output Voltage, DCV
30 - 1000
10
±(2% of setting + 5V)
SETTINGS
Max-Limit Resistance, MΩ
0, 1 - 9999 (0=OFF)
1
±(2% of setting+2counts)at 500-1000VDC,
1 -1000 MΩ
 
Min-Limit Resistance, MΩ
1 - 9999
1
±(5% of setting+2counts)at 500-1000VDC,
1000 -9999 MΩ
±(8% of setting+2counts)at 30-500VDC,
1 -1000 MΩ
Ramp Up Time, second
0.1 - 999.9
0.1
±(0.1% + 0.05sec)
Ramp Down Time, second
0, 1.0 - 999.9
0.1
Delay Time, second
0, 0.5 - 999.9
(0=continuous)
0.1
MEASUREMENT
AC/DC Voltage, KV
0 - 6.00
0.01
±(1.5% of reading + 1count)
DC Voltage, V (IR only)
30 - 1000
1
±(1.5% of reading + 5V)
AC Current, mA
0 - 3.500
0.001
±(2% of reading + 2counts)
3.00 - 20.00
0.01
DC Current, µA
0 - 350.0
0.1
±(2% of reading + 2counts)
DC Current, mA
0.300 - 3.500
0.001
3.00 - 7.50
0.01
Resistance, , MΩ
1 - 9999
(Auto Range)
0.001
0.01
0.1
1
±(2% of setting+2counts)at 500-1000VDC,
1 -1000 MΩ
±(5% of setting+2counts)at 500-1000VDC,
1000 -9999 MΩ
±(8% of setting+2counts)at 30-500VDC,
1 -1000 MΩ
GENERAL
Input Voltage AC 115/230Vac±15%, 50/60Hz ± 5%, Fuse 3.15A
PLC Remote Control Input : Test , Reset , Memory1.2.3 , Interlock
Output : Pass , Fail , Processing , Reset-Out
Interface(Option) RS485 Interface
Memory 10 memories, 3 steps/memory
Graphic Display 128×64 Graphic LCD
Safety Built-in Smart GFI circuit,GFI trip current 450?A max, HV shut down speed: <1mS
Key Lock To prevent unauthorized alteration of the test Parameters
Calibration Build-in software and external calibrated meters
Verification Build-in software driven verification menu to test fault detection circuits
Alarm Volume Setting Range: 0-9 ;0=OFF, 1 is softest volume, 9 is loudest volume.
Environment 0-40℃, 20-80%RH
Dimension/Net Weight 215mm(W)×89mm(H)×370mm(D)/ 10Kg
STANDARD ACCESSORIES
Power Cord(10A) ×1
Fuses ×2 (Including a spare contained in the fuse holder)
Interlock Disable Key(1505) ×1
Hipot Test Lead ,1.5m(1101) ×1
Hipot Return Lead ,1.8m(1102) ×1
*product specifications are subject to change without notice.

7140耐压测试仪,苏州德计仪器华仪全系列产品销售,请致电销售部门 : ,品牌厂家:华仪,中国台湾华仪,中国台湾华钛,华仪电子股份有限公司;销售:代理商 经销商;价格:*销售 * 报价 特惠价 批发价 库存;使用方法:原理技术参数 选型 说明书 销售网络:苏州 昆山 常熟 太仓 张家港 吴江 常州 南京 无锡 南通 上海 杭州 宁波 嘉兴 武汉 成都 西安 北京 深圳 广州 惠州东莞 厦门 福州 贵阳 昆明 长沙 南宁 郑州 哈尔滨 长春 沈阳 天津 石家庄 合肥;7140耐压测试仪



留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7

在线客服 二维码

扫一扫,关注我们