欢迎进入苏州德计仪器仪表有限公司网站! 固话:0512-68790450 手机:13915418480 返回首页 | 联系我们
大家都在搜: 固纬安规测试仪,固纬耐压测试仪,固纬LCR测试仪
产品中心/ product center 您的位置:网站首页 > 产品中心 > > 耐压测试仪,安规测试仪 > 7630全功能接触电流测试器
全功能接触电流测试器

全功能接触电流测试器

产品型号: 7630

所属分类:耐压测试仪,安规测试仪

产品时间:2017-07-05

简要描述:量测频宽 DC - 1MHz 完全符合 IEC60990 接触电流测试规范

详细说明:

可与华仪电子的安规测试器连结;组成安规六合一(ACW/DCW/IR/GB/RUN/LLT)测试系统
   
超大型 320 x 240 Graphic LCD ,可同时显示量测电压/接触电流及测试时间
   
量测频宽 DC - 1MHz 完全符合 IEC60990 接触电流测试规范
   
可量测zui大峰值 75mApeak / 有效值 35mArms,满足安规机构测试验证需求(选配)
   
内建 7 组人体模拟阻抗(MD)且可扩充一组,一台仪器就可以满足多种安规标准要求
   
MD具有BNC量测端子,可外接示波器或电压表读取MD电压值,方便对MD进行校准
   
人体模拟阻抗(MD)的校准方式,可以完全符合IEC60990标准规定进行
   
可灵活选择MD漏电流量测点(如: IEC60065 U1&U2);符合安规标准要求
   
负载zui大容量为 10KVA / 40Arms,允许启动瞬间承受 250Apeak 不切断保护
   
可选配产品电气性能量测模块(RUN Test Module),可量测功率/电压/电流/功率因子
   
可选配多功能界面卡内含USB-A数据收集功能,内部记忆可储存至少10万笔的测试结果
INPUT
Voltage 115/230 VAC ± 15%
Frequency 50/60 Hz ± 5%
Fuse 2A Slow-Blo 250V AC
Line condition
Power Switch Reverse polarity switch for normal condition (on / off / auto setting)
Neutral Switch Neutral switch on/off selection for single fault condition
Ground Switch Ground switch on/off selection for class I single fault condition
Probe Setting
Surface to Surface (PH- PL)
Surface to Line(PH - L)
Ground to Line (G - L)
Ground to Neutral (G - N)
Auto Function (G - N & G - L)
SETTING
Touch Current High Limit (RMS) Range: 0.0uA~ 999.9uA/ 1000uA~5999uA/ 6.00mA~20.00mA
Resolution: 0.1uA/1uA/0.01mA
Touch Current Low Limit (RMS) Range: 0.0-999.9 uA
Resolution: 0.1uA
Touch Current High Limit (Peak) Range: 0.0uA - 999.9uA/ 1000uA - 9999uA/ 10.0mA - 30.0mA
Resolution: 0.1uA/1uA/0.1mA
Touch Current Low Limit (Peak) Range: 0.0-999.9 uA
Resolution: 0.1uA
DISPLAY
Touch Current Display (RMS) Range 1 0.0uA~ 999.9uA, frequency DC - 1MHz
Resolution 0.1uA
Accuracy DC : ±2% of reading + 3counts
15Hz < f <100KHz : ±2% of reading + 3counts
100KHz < f < 1MHZ : ±5% of reading (10.0uA - 999.9uA)
Range 2 1000uA~8500uA, frequency DC - 1MHz
Resolution 1uA
Accuracy DC : ±2% of reading + 3counts
15Hz < f <100KHZ : ±2% of reading + 3counts
100KHz < f <1MHZ : ±5% of reading (10uA - 8500uA)
Range 3 8.00mA~20.00mA, frequency DC - 1MHz
Resolution 0.01mA
Accuracy DC : ±2% of reading + 3counts
15Hz < f < 1MHz : ±5% of reading (0.01mA -20.00mA )
Touch Current Display (Peak) Range 1 0.0uA~ 999.9uA, frequency DC - 1MHz
Resolution 0.1uA
Accuracy DC : ±2% of reading +2uA
15Hz < f <1MHZ : ±10% of reading +2uA
Range 2 1000uA ~ 8500uA, frequency DC - 1MHz
Resolution 1uA
Accuracy DC : ±2% of reading +2counts
15Hz < f <1MHz : ±10% of reading +2counts
Range 3 8.0mA ~ 30.0mA, frequency DC - 100KHz
Resolution 0.01mA
Accuracy DC : ±2% of reading +2counts
15Hz < f < 100KHz : ±10% of reading +2counts
Measuring Device Module
MD1 IEC60990 Fig4 U2, IEC 60950-1, IEC60335-1, IEC60598-1, IEC60065, IEC61010
IEC60990 Fig4 U1, IEC60065
MD2 IEC60990 Fig5 U3, IEC60598-1
IEC60990 Fig5 U1
MD3 IEC 60601-1
MD4 UL544NP, UL484 , UL923, UL471, UL867, UL697
MD5 UL544P
MD6 UL1563
MD7 IEC60950, IEC61010-1 FigA.2 (2K ohm) for RUN Test MD Circuit.
External MD Basic measuring element 1k ohm
MD Voltage Limit 70Vdc
Leakage Current Offset Range: 0 - 999.9uA
Resolution: 0.1uA
DUT POWER
AC Voltage 0.0-277.0V
AC Current 40Arms max continuous
Over Current Protection 50Arms, Response Time < 3 sec / 250Apeak Response Time <10u sec
AC Voltage High/Low Limit Range: 0.0-277.0V
Resolution: 0.1V/step
AC Voltage Display Range: 0.0 - 277.0 V
Resolution: 0.1 volt / step
Accuracy: ±(1.5% of reading + 2 counts) , 30.0 - 277.0VAC
Delay time setting Range: 0.2 !V 999.9 seconds
Resolution: 0.1 second
Timer display Range: 0.0 !V 999.9 seconds
Resolution: 0.1 second
Accuracy: ± (0.1% of reading + 0.05 seconds)
GENERAL
PLC Remote Control Input - Test, Reset, Interlock & Recall File 1 through10
Output - Pass, Fail, Test-in-Process, Start-Out, Reset-Out
Scanner Control It is applied to control Matrix Scanner (Model 7006)
Memory 50 memories , 30steps per each memory . Max. Result Display 900 data (30 memories x 30 steps)
Auto Reverse Function AUTO Reverse ON / OFF parameter setting selection
Automatic Reverse polarity switch for normal condition in one step setting menu.
Only display maximum leakage current value.
Scope Output Interface At rear panel BNC type to connet scope for some IEC standards test requirement and application.
Display 320 X 240 graphic LCD
LCD Contrast Setting Range: 1-9; 1 is lightest character, 9 is darkest character.
Alarm Volume Setting Range: 0-9; 0=OFF, 1 is softest volume, 9 is loudest volume.
Security Lockout capability to avoid unauthorized access to test set-up programs.
Calibration Software and adjustments are made through front panel,
Automatic Calibration alert function to signal operator when calibration is due.
Results Display All test result information will be displayed on the screen.
Interface RS232 standard
Safety Product with TUV/GS certificate
Dimension 430 (W) x 133(H) x 300 (D) mm
Weight 12 Kg
STANDARD ACCESSORIES
Power Cord X1
Fuses X2 (Including a spare contained in the fuse holder)
Interlock Disable Key(1505) X1
TC Receptacle Adaptor Box (1932) X1
Hipot Test Lead for PH / PL (1101) X2
RS232 Link Cable 1.5m(1130) X1
DUT Power Cable 40A(1148) X1
RUN Module (Opt.752)
W Range : 0-1KW / 1-10KW Resolution : 0.5W / 5W
A Range : 0.000 !V 3.500 A / 3.00 - 40.00A , Resolution : 0.001A / 0.01A
PF 0.000 -1.000
Leakage Current Range : 0.00 - 10.00mA , Resolution : 0.01mA
AC Current High/Low Limit Setting Range: 0-40A
Resolution: 0.01A/step
AC Current Display Range: 0.000 !V 3.500 A / 3.00 - 40.00A
Resolution: 0.001A / 0.01A
Accuracy : ± (2 % of reading + 5 counts) / ± (2 % of reading + 2 counts)
AC Power High/Low Limit Setting Range: 0 - 10KW
Resolution: 1W
AC Power Display Range: 0.0 -1000.0W / 1000 - 10000W
Resolution: 0.5W / 5W
Accuracy : ±(2 % of reading + 2 counts )
Power Factor High/Low Limit Setting Range: 0.000 - 1.000
Resolution: 0.001
Power Factor Display Range: 0.000 - 1.000
Resolution: 0.001
Accuracy : ± (2 % of reading + 2 counts )
Leakage Current High/Low Limit Setting Range: 0.00 - 10.00mA
Resolution: 0.01mA
Leakage Current Display Range: 0.00 - 10.00mA
Resolution: 0.01mA
Accuracy : ± (2 % of reading + 2 counts )
Delay Timer Setting Range: 0, 0.2 - 999.9
Resolution: 0.1
Dwell Timer Setting Range: 0, 0.1-999.9 (0=continuous)
Resolution: 0.1
Timer display Range: 0.0 - 999.9 seconds
Resolution: 0.1 second
Accuracy: ± (0.1% of reading + 0.05 seconds)
Power Control It is applied to control Transformer Box (1931/1931S) or AC Power Source(6700/6800/6400 Series)
HV & GB Link Module (Opt. 753)
Max. ACW 4000VAC, DCW 4000VDC & Max. Ground Bond 40A
GPIB Interface Card (Opt. 731)
Printer Port Interface Card (Opt. 732)
Multi-function Interface Card (Opt. 751)
Including USB port A type, combination of RS-232, RS-485 port, and Bar Code Input with internal memory capability.
High Measurement Range 35mArms / 70mApeak & 4MDs (Opt. 754 )
35mArms / 70mApeak for IEC60990 fig4(U1 and U2), IEC60990 fig5(U1 and U3), UL484, IEC60601 Test Requiremt ,
Notice : Option this MD circuit have to replace MD module all MD circuits .
Transformer Box (Option) Add this option must optional Opt.752 RUN Module.
1931 Series Transformer Box
(500VA/ 1KVA/1.8KVA/3.6KVA)
Multi-Tape of 1.0, 1.06, 1.1 times of input voltage.
1931-S Series Transformer Box
(500VA/ 1KVA/1.8KVA/3.6KVA)
Multi-Tape of 0.8, 0.85, 0.9, 1.0, 1.06, 1.1 times of input voltage.
AC Power Source (Option) Add this option must optional Opt.752 RUN Module.
6800 Series Digital AC Power Source (6805, 6810 , 6820 , 6830 and 6840 )
6700 Series Programmable AC Power Source (6705, 6710 , 6720 , 6730 and 6740 )
6400 Series AC Power Source (6402, 6403, 6405, 6410 )



留言框

  • 产品:

  • 留言内容:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 详细地址:

  • 省份:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7

在线客服 二维码

扫一扫,关注我们

扫一扫访问手机站扫一扫访问手机站
访问手机站